Creating a ZFS Storage Pool
The previous example illustrates the simplicity of ZFS. The remainder of this chapter
demonstrates a more complete example similar to what you would encounter in your
environment. The first tasks are to identify your storage requirements and create a
storage pool. The pool describes the physical characteristics of the storage and must
be created before any file systems are created.
How to Identify Storage Requirements for Your ZFS Storage Pool
- Determine available devices.
Before creating a storage pool, you must determine which devices will store your
data. These devices must be disks of at least 128 Mbytes in size,
and they must not be in use by other parts of the operating
system. The devices can be individual slices on a preformatted disk, or they
can be entire disks that ZFS formats as a single large slice.
For the storage example used in How to Create a ZFS Storage Pool, assume that the whole disks /dev/dsk/c1t0d0 and
/dev/dsk/c1t1d0 are available for use.
For more information about disks and how they are used and labeled, see
Using Disks in a ZFS Storage Pool.
- Choose data replication.
ZFS supports multiple types of data replication, which determines what types of hardware
failures the pool can withstand. ZFS supports nonredundant (striped) configurations, as well as mirroring
and RAID-Z (a variation on RAID-5).
For the storage example used in How to Create a ZFS Storage Pool, basic mirroring of two available disks
For more information about ZFS replication features, see Replication Features of a ZFS Storage Pool.
How to Create a ZFS Storage Pool
- Become root or assume an equivalent role with the appropriate ZFS rights profile.
For more information about the ZFS rights profiles, see ZFS Rights Profiles.
- Pick a pool name.
The pool name is used to identify the storage pool when you are
using the zpool or zfs commands. Most systems require only a single pool,
so you can pick any name that you prefer, provided it satisfies the
naming requirements outlined in ZFS Component Naming Requirements.
- Create the pool.
For example, create a mirrored pool that is named tank.
# zpool create tank mirror c1t0d0 c1t1d0
If one or more devices contains another file system or is otherwise in
use, the command cannot create the pool.
For more information about creating storage pools, see Creating a ZFS Storage Pool.
For more information about how device usage is determined, see Detecting in Use Devices.
- View the results.
You can determine if your pool was successfully created by using the zpool list
# zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
tank 80G 137K 80G 0% ONLINE -
For more information about viewing pool status, see Querying ZFS Storage Pool Status.