Follow Techotopia on Twitter

On-line Guides
All Guides
eBook Store
iOS / Android
Linux for Beginners
Office Productivity
Linux Installation
Linux Security
Linux Utilities
Linux Virtualization
Linux Kernel
System/Network Admin
Programming
Scripting Languages
Development Tools
Web Development
GUI Toolkits/Desktop
Databases
Mail Systems
openSolaris
Eclipse Documentation
Techotopia.com
Virtuatopia.com

How To Guides
Virtualization
General System Admin
Linux Security
Linux Filesystems
Web Servers
Graphics & Desktop
PC Hardware
Windows
Problem Solutions
Privacy Policy

  




 

 

Appendix A. Boot Options

The Fedora installation system includes a range of functions and options for administrators. To use boot options, enter linux option at the boot: prompt.

If you specify more than one option, separate each of the options by a single space. For example:


linux 
option1
 
option2
 
option3



[Note] Rescue Mode

The Fedora installation and rescue discs may either boot with rescue mode, or load the installation system. For more information on rescue discs and rescue mode, refer to Section A.6.2, “Booting Your Computer with the Rescue Mode”.

A.1. Configuring the Installation System at the boot: Prompt

You can use the boot: prompt to specify a number of settings for the installation system, including:

  • language

  • display resolution

  • interface type

  • Installation method

  • network settings

A.1.1. Specifying the Language

To set the language for both the installation process and the final system, specify the ISO code for that language with the lang option. Use the keymap option to configure the correct keyboard layout.

For example, the ISO codes el_GR and gr identify the Greek language and the Greek keyboard layout:


linux lang=
el_GR
 keymap=
gr



A.1.2. Configuring the Interface

You may force the installation system to use the lowest possible screen resolution (640x480) with the lowres option. To use a specific display resolution, enter resolution= setting as a boot option. For example, to set the display resolution to 1024x768, enter:


linux resolution=
1024x768



To run the installation process in text mode, enter:

  
linux text

To enable support for a serial console, enter serial as an additional option.

[Note] Configuring the Installed System

The installed system runs the Setup Agent the first time that it boots. Use the Setup Agent to configure the display settings for the new system. Refer to Section 13.5, “Display” for more information on configuring the display with the Setup Agent.

A.1.3. Specifying the Installation Method

Use the askmethod option to display additional menus that enable you to specify the installation method and network settings. You may also configure the installation method and network settings at the boot: prompt itself.

To specify the installation method from the boot: prompt, use the method option. Refer to Table A.1, “Installation Methods” for the supported installation methods.

Installation Method Option Format

CD or DVD drive

method= cdrom

Hard Drive

method= hd://device/

HTTP Server

method= https://server.example.com/directory/

FTP Server

method= ftp://server.example.com/directory/

NFS Server

method= nfs:server.example.com:/directory/

Table A.1. Installation Methods

A.1.4. Manually Configuring the Network Settings

By default, the installation system uses DHCP to automatically obtain the correct network settings. To manually configure the network settings yourself, either enter them in the Configure TCP/IP screen, or at the boot: prompt. You may specify the ip address, netmask, gateway, and dns server settings for the installation system at the prompt. If you specify the network configuration at the boot: prompt, these settings are used for the installation process, and the Configure TCP/IP screen does not appear.

This example configures the network settings for an installation system that uses the IP address 192.168.1.10:


linux ip=
192.168.1.10
 netmask=
255.255.255.0
 gateway=
192.168.1.1
 dns=
192.168.1.2,192.168.1.3



[Note] Configuring the Installed System

Use the Network Configuration screen to specify the network settings for the new system. Refer to Chapter 7, Network Configuration for more information on configuring the network settings for the installed system.

 
 
  Published under the terms of the GNU General Public License Design by Interspire