31.5. Network Configuration
Figure 31.8. Network Configuration
If the system to be installed via kickstart does not have an Ethernet card, do not configure one on the
Networking is only required if you choose a networking-based installation method (NFS, FTP, or HTTP). Networking can always be configured after installation with the
Network Administration Tool
system-config-network). Refer to the Red Hat Enterprise Linux Deployment Guide for details.
For each Ethernet card on the system, click
Add Network Device
and select the network device and network type for the device. Select
to configure the first Ethernet card,
for the second Ethernet card, and so on.