Figure 2-8. Network Configuration
If the system to be installed via kickstart does not have an Ethernet
card, do not configure one on the Network
Networking is only required if you choose a networking-based installation
method (NFS, FTP, or HTTP). Networking can always be configured after
installation with the Network Administration Tool
(system-config-network). Refer to Chapter 18 Network Configuration for details.
For each Ethernet card on the system, click Add Network
Device and select the network device and network type for
the device. Select eth0 to configure the first
Ethernet card, eth1 for the second Ethernet card,
and so on.