2.6.9-1-686-smp
Installed 12 November 2004 as package
kernel-image-2.6.9-1-686-smp. Digital camera USB
connection and USB Flash drive fail to be recognised as previously:
Plug in the camera and dmesg gives:
usb 1-1: new full speed USB device using address 5
ubb: device 5 capacity nsec 246017 bsize 512
ubb: was not changed
/dev/ub/b: p1
|
With
kernel-image-2.6.7-1-686-smp
dmesg reported:
usb 1-1: new full speed USB device using address 4
scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: hp Model: photosmart 320 Rev: 100
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdc: 246017 512-byte hdwr sectors (126 MB)
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
/dev/scsi/host4/bus0/target0/lun0: p1
Attached scsi removable disk sdc at scsi4, channel 0, id 0, lun 0
USB Mass Storage device found at 4
|
and the device was mounted as
/dev/sdc1. After moving to
udev
(see Section
![[*]](crossref.png)
) things started working as
expected.
Copyright © 1995-2006 [email protected]
