Remote System Explorer Messages
General Messages
RSEG0402
Severity: Error
LevelOne: %1 must be between %2 and %3.
LevelTwo:
RSEG1001
Severity: Unexpected
LevelOne: Under construction
LevelTwo: This function is not yet available.
RSEG1002
Severity: Question
LevelOne: This will reload the Remote System Explorer. Are you sure?
LevelTwo: This action should only be used after receiving files from a team repository. It reloads the RSE from the workspace, incorporating the new files.
RSEG1003
Severity: Unexpected
LevelOne: An unexpected exception has occurred
LevelTwo: %1
RSEG1006
Severity: Error
LevelOne: Enter name
LevelTwo: You must enter a name in the field where the cursor is positioned.
RSEG1007
Severity: Error
LevelOne: Name in use
LevelTwo: This name is already used by another resource. Enter a unique name.
RSEG1008
Severity: Error
LevelOne: Name not valid
LevelTwo: The name entered does not have valid syntax
RSEG1009
Severity: Error
LevelOne: You must rename %1
LevelTwo: You have left the new name the same as the old name. Enter a new name that is different from the old name.
RSEG1010
Severity: Error
LevelOne: Name %1 is specified more than once
LevelTwo: Two or more resources have been renamed to the same new name. Each resource must have a unique name.
RSEG1011
Severity: Error
LevelOne: Name %1 not valid
LevelTwo: The name %1 does not have valid syntax
RSEG1012
Severity: Error
LevelOne: Enter new name
LevelTwo: You have the new name entry field empty. You must enter a unique new name.
RSEG1013
Severity: Error
LevelOne: Expand failed or cancelled. Try again.
LevelTwo: When expanding a node in the tree, and retrieving the resources, either an error occurred or you cancelled the operation. The expand is cancelled.
RSEG1014
Severity: Error
LevelOne: Enter profile name
LevelTwo: You must enter a name for the profile. Profiles contain all connections, filters and user defined actions. They are shared by the team, but each team member sees only those profiles which are active. Each profile can be private to you, or used by the whole team if all team members make the profile active. The name should reflect this. That is, if the profile is to be private to you, pick a name that is least likely to collide with a name chosen by other team members.
RSEG1015
Severity: Error
LevelOne: Profile of that name already exists
LevelTwo: There is already a profile of that name. Choose a unique name for the profile.
RSEG1016
Severity: Error
LevelOne: Not a valid profile name
LevelTwo: Profiles are stored as folders in the file system, so profile names must be valid folder names for the workbench. Furthermore, they must not contain pound signs (#) or exceed 100 characters in length. Profile names are not case sensitive, but are case tolerant.
RSEG1017
Severity: Error
LevelOne: Enter number
LevelTwo: The value %1 you entered is not numeric. Enter only numeric input.
RSEG1018
Severity: Error
LevelOne: Name not valid as folder name
LevelTwo: The name must be a valid folder name within the workbench and the underlying file system.
RSEG1019
Severity: Error
LevelOne: Name not valid as file name
LevelTwo: The name must be a valid file name within the workbench and the underlying file system.
RSEG1020
Severity: Error
LevelOne: Please enter a valid system type.
LevelTwo: You must select a system type. The system type is the type of the operating system of the remote sytem.
RSEG1021
Severity: Error
LevelOne: Please enter a valid connection name.
LevelTwo: You must enter a connection name. This name is arbitrary, but must be unique to the selected profile.
RSEG1022
Severity: Error
LevelOne: Connection name is not unique for the selected profile.
LevelTwo: Connection names must be unique to the profile that contains the connection. Specify a name not already in use.
RSEG1023
Severity: Error
LevelOne: Invalid connection name. Must be a valid folder name in the underlying file system.
LevelTwo: The connection name is not syntactically valid. The name must be a valid folder name within the workbench and the underlying file system.
RSEG1024
Severity: Error
LevelOne: Enter host name or IP address
LevelTwo: You must specify a host name or TCP/IP address for the remote system.
RSEG1025
Severity: Error
LevelOne: Enter user ID
LevelTwo: You must specify a user ID to be used to connect to the system.
RSEG1026
Severity: Error
LevelOne: Not a valid user ID
LevelTwo: The user ID entered is not syntactically valid. The only restriction for a user ID is that it not use the characters '=' or ';'.
RSEG1027
Severity: Error
LevelOne: Enter port number
LevelTwo: You must specify a port number that is used to connect with the server-side communication layer.
RSEG1028
Severity: Error
LevelOne: Not a valid port number
LevelTwo: The value you entered is not a valid port number. It must be a positive integer between 1 and 65536.
RSEG1029
Severity: Error
LevelOne: Enter value
LevelTwo: You must enter a value in the field where the cursor is.
RSEG1030
Severity: Error
LevelOne: Entry is not unique
LevelTwo: The value you entered is already in use. Specify a value that is not already in use.
RSEG1031
Severity: Error
LevelOne: Syntax is not valid
LevelTwo: The syntax of the value at the cursor position is not valid.
RSEG1032
Severity: Error
LevelOne: Enter path
LevelTwo: You must specify a file system path.
RSEG1033
Severity: Error
LevelOne: Path is not unique
LevelTwo: The path you specified is already in use.
RSEG1034
Severity: Error
LevelOne: Path syntax is not valid
LevelTwo: The syntax of the path you specified is not valid. Enter a file system path that is valid for the remote operating system.
RSEG1035
Severity: Error
LevelOne: Enter password
LevelTwo: You must specify your password.
RSEG1036
Severity: Error
LevelOne: Password has expired
LevelTwo: Your password has expired, and must be reset before continuing.
RSEG1037
Severity: Error
LevelOne: Enter filter pool name
LevelTwo: You must specify a name for your filter pool. Filter pool names are arbitrary, but typically reflect the contents of the filters, such as "Release 1" or "Accounts Payable".
RSEG1038
Severity: Error
LevelOne: Filter pool name already exists in this profile
LevelTwo: A filter pool with this name already exists in the profile.
RSEG1039
Severity: Error
LevelOne: Filter pool name not valid
LevelTwo: The filter pool name you specified is not a valid name. The name must be a valid folder name in the workbench, and must not contain the pound sign '#'. It must also not exceed 50 characters in length.
RSEG1040
Severity: Error
LevelOne: Profile name %1 is reserved
LevelTwo: The given profile name is reserved. Specify another name for the profile.
RSEG1041
Severity: Question
LevelOne: Connection of name %1 already exists in profile %2. Continue?
LevelTwo: A connection of this name exists in another profile. While this allowed, it is discouraged as it may lead to confusion. Press Yes to create the connection, or No to cancel the creation.
RSEG1042
Severity: Error
LevelOne: Enter filter name
LevelTwo: You must specify a name for your filter. You can specify any name you like. Choose a name that tells others the contents of this filter. For example, "Source Files for Release 1".
RSEG1043
Severity: Error
LevelOne: Filter name already exists in this filter pool
LevelTwo: The filter name you specified is in use. You must specify a name unique for the parent filter pool.
RSEG1044
Severity: Error
LevelOne: Filter name not valid
LevelTwo: The filter name you specified is not a valid name. The name must be a valid file name in the workbench, and must not contain the pound sign '#'. It must also not exceed 100 characters in length.
RSEG1045
Severity: Error
LevelOne: Enter filtering information
LevelTwo: You must specify filtering information
RSEG1046
Severity: Error
LevelOne: Filter string already exists
LevelTwo: You specified a filter string which already exists in this filter. Having duplicate filter strings will result in duplicate resources in the expanded filter. Specify unique filter strings, preferably which result in unique resources. For example, don't specify both ABC* and A*.
RSEG1047
Severity: Error
LevelOne: Filter string not valid
LevelTwo: The filter string you specified is not syntactically correct.
RSEG1048
Severity: Error
LevelOne: Duplicate filter string '%1'.
LevelTwo: You have defined the same filter string twice or more. This will result in multiple copies of the same resource, when this filter is expanded. Delete the redundant filter strings.
RSEG1049
Severity: Error
LevelOne: Filter string '%1' already exists in filter %2
LevelTwo: This filter string cannot be copied or moved to the target filter. The same filter string already exists there
RSEG1050
Severity: Unexpected
LevelOne: Save to disk failed with an unexpected exception
LevelTwo: %1
RSEG1051
Severity: Unexpected
LevelOne: Restore of data failed with unexpected exception
LevelTwo: %1
RSEG1052
Severity: Question
LevelOne: Delete selected resources?
LevelTwo: This is a permanent deletion of the selected resources and cannot be undone
RSEG1053
Severity: Question
LevelOne: Delete profile '%1'?
LevelTwo: Do you want to delete this profile, including all of its connections, filters and user actions? Select Yes to delete, or No to cancel the delete request
RSEG1054
Severity: Information
LevelOne: Connecting to %1
LevelTwo:
RSEG1055
Severity: Information
LevelOne: Connecting to %1 at port %2
LevelTwo:
RSEG1056
Severity: Unexpected
LevelOne: Connect to %1 failed with an unexpected exception
LevelTwo: %2
RSEG1057
Severity: Error
LevelOne: Connect failed. Host %1 not found or not responding
LevelTwo:
RSEG1058
Severity: Information
LevelOne: Connect to %1 was cancelled
LevelTwo:
RSEG1059
Severity: Information
LevelOne: Disconnecting from %1
LevelTwo:
RSEG1060
Severity: Information
LevelOne: Disconnecting from %1 at port %2
LevelTwo:
RSEG1061
Severity: Unexpected
LevelOne: Disconnect from %1 failed with exception
LevelTwo: %2
RSEG1062
Severity: Error
LevelOne: Disconnect from %1 was cancelled
LevelTwo:
RSEG1063
Severity: Unexpected
LevelOne: Unexpected error deleting %1
LevelTwo: %2
RSEG1064
Severity: Unexpected
LevelOne: Unexpected error renaming %1
LevelTwo: %2
RSEG1065
Severity: Error
LevelOne: Unexpected error moving %1
LevelTwo:
RSEG1066
Severity: Unexpected
LevelOne: Operation failed with exception '%1'
LevelTwo:
RSEG1067
Severity: Error
LevelOne: Operation cancelled.
LevelTwo:
RSEG1068
Severity: Warning
LevelOne: Warning. Profile '%1' should be made active. Active connection '%2' contains a reference to it.
LevelTwo:
RSEG1069
Severity: Warning
LevelOne: Warning. Profile '%1' should be active. Active connection '%2' contains a reference to it.
LevelTwo:
RSEG1070
Severity: Information
LevelOne: Resolving %1
LevelTwo:
RSEG1071
Severity: Information
LevelOne: Running %1
LevelTwo:
RSEG1072
Severity: Information
LevelOne: Copying '%1' to '%2'
LevelTwo:
RSEG1073
Severity: Information
LevelOne: Copying connection %1
LevelTwo:
RSEG1074
Severity: Information
LevelOne: Copying connections
LevelTwo:
RSEG1075
Severity: Information
LevelOne: Copying filter pools
LevelTwo:
RSEG1076
Severity: Information
LevelOne: Copying filter pool %1
LevelTwo:
RSEG1077
Severity: Information
LevelOne: Copying filters
LevelTwo:
RSEG1078
Severity: Information
LevelOne: Copying filter %1
LevelTwo:
RSEG1079
Severity: Information
LevelOne: Copying filter strings
LevelTwo:
RSEG1080
Severity: Information
LevelOne: Copying filter string %1
LevelTwo:
RSEG1081
Severity: Information
LevelOne: Copying subsystems
LevelTwo:
RSEG1082
Severity: Information
LevelOne: Filter pool(s) successfully copied to '%1'. You must create a new filter pool reference to see it (them).
LevelTwo:
RSEG1083
Severity: Information
LevelOne: Moving '%1' to '%2'
LevelTwo:
RSEG1084
Severity: Information
LevelOne: Moving connection %1
LevelTwo:
RSEG1085
Severity: Information
LevelOne: Moving connections
LevelTwo:
RSEG1086
Severity: Information
LevelOne: Moving filter pools
LevelTwo:
RSEG1087
Severity: Information
LevelOne: Moving filter pool %1
LevelTwo:
RSEG1088
Severity: Information
LevelOne: Moving filters
LevelTwo:
RSEG1089
Severity: Information
LevelOne: Moving filter %1
LevelTwo:
RSEG1090
Severity: Information
LevelOne: Moving filter strings
LevelTwo:
RSEG1091
Severity: Error
LevelOne: Moving filter string %1
LevelTwo:
RSEG1092
Severity: Information
LevelOne: Filter pool(s) successfully moved to '%1'. You must create a new filter pool reference to see it (them).
LevelTwo:
RSEG1093
Severity: Information
LevelOne: Setting %1
LevelTwo:
RSEG1094
Severity: Information
LevelOne: Setting properties
LevelTwo:
RSEG1095
Severity: Information
LevelOne: Querying %1
LevelTwo:
RSEG1096
Severity: Information
LevelOne: Querying properties
LevelTwo:
RSEG1097
Severity: Information
LevelOne: Running %1
LevelTwo:
RSEG1098
Severity: Error
LevelOne: Expand failed. Try again
LevelTwo:
RSEG1099
Severity: Information
LevelOne: Expand cancelled. Try again
LevelTwo:
RSEG1100
Severity: Information
LevelOne: Empty list
LevelTwo:
RSEG1101
Severity: Information
LevelOne: List cancelled
LevelTwo:
RSEG1102
Severity: Information
LevelOne: Filter created successfully. Expand this again to create another
LevelTwo:
RSEG1103
Severity: Error
LevelOne: Connection %1 not found
LevelTwo: No connection named %1 currently exists
RSEG1104
Severity: Error
LevelOne: Profile %1 not found
LevelTwo: No profile named %1 currently exists
RSEG1105
Severity: Error
LevelOne: Folder %1 not found on host %2
LevelTwo:
RSEG1106
Severity: Error
LevelOne: File %1 not found on host %2
LevelTwo:
RSEG1107
Severity: Error
LevelOne: File or folder %1 not found on host %2
LevelTwo:
RSEG1108
Severity: Information
LevelOne: Connection created successfully. Expand this again to create another
LevelTwo:
RSEG1109
Severity: Warning
LevelOne: Connection busy
LevelTwo:
RSEG1110
Severity: Error
LevelOne: Command interrupted
LevelTwo:
RSEG1111
Severity: Error
LevelOne: Unable to run command
LevelTwo: Possible causes: connection has been deleted, connection has been renamed, or connection has been disconnected
RSEG1112
Severity: Warning
LevelOne: Command cancelled
LevelTwo:
RSEG1115
Severity: Information
LevelOne: Copying...
LevelTwo:
RSEG1116
Severity: Information
LevelOne: Moving...
LevelTwo:
RSEG1117
Severity: Information
LevelOne: Copying %1...
LevelTwo:
RSEG1118
Severity: Information
LevelOne: Moving %1...
LevelTwo:
RSEG1119
Severity: Information
LevelOne: Saving %1...
LevelTwo:
RSEG1120
Severity: Error
LevelOne: %1 is not a valid archive name.
LevelTwo: You must give a filename with an extension that is recognized as a valid archive type extension.
RSEG1122
Severity: Error
LevelOne: The archive is corrupted or unreadable.
LevelTwo: The archive cannot be opened because its format is unrecognized, or its contents are damaged in some way.
RSEG1123
Severity: Error
LevelOne: Cannot create archive.
LevelTwo: There was an error creating the empty archive. The archive was not created.
RSEG1124
Severity: Error
LevelOne: Creation of the virtual file or folder %1 failed.
LevelTwo: There was an error creating the virtual file or folder. The virtual file or folder was not created.
RSEG1125
Severity: Error
LevelOne: Deletion of the virtual file or folder %1 failed.
LevelTwo: There was an error deleting the virtual file or folder. The virtual file or folder was not deleted.
RSEG1126
Severity: Error
LevelOne: Could not move the virtual file or folder %1.
LevelTwo: There was an error moving the virtual file or folder. The virtual file or folder was not moved.
RSEG1130
Severity: Question
LevelOne: Permanently delete selected remote resource(s)?
LevelTwo: This is a permanent deletion of the selected remote resources from disk. This action cannot be undone
RSEG1150
Severity: Error
LevelOne: Unable to perform action as the underlying file system folder is in use
LevelTwo: The file system folder %1 is in use by another task and cannot be removed or modified
RSEG1151
Severity: Error
LevelOne: Unable to perform action as the underlying file system file is in use
LevelTwo: The file system file %1 is in use by another task and cannot be removed or modified
RSEG1160
Severity: Question
LevelOne: Filter pool %1 created. Create a reference to it in the selected subsystem?
LevelTwo: New filter pools are not accessible until a reference is added to them in a subsystem. Select Yes to add a reference to the new filter pool in selected subsystem %2
RSEG1161
Severity: Error
LevelOne: Filter update failed: %1
LevelTwo: %2
RSEG1162
Severity: Error
LevelOne: Filter rename failed: %1
LevelTwo: %2
RSEG1170
Severity: Error
LevelOne: Enter numeric value
LevelTwo: You must enter a numeric value
RSEG1171
Severity: Error
LevelOne: Value %1 not numeric
LevelTwo: The value specified is not a valid number
RSEG1172
Severity: Error
LevelOne: Value %1 not in range
LevelTwo: The value specified is not within the valid range of %2 to %3
RSEG1192
Severity: Error
LevelOne: Enter source type
LevelTwo: You must enter a source type
RSEG1193
Severity: Error
LevelOne: Source type "%1" not valid
LevelTwo: The source type you entered is not valid.
RSEG1194
Severity: Error
LevelOne: Source type "%1" already exists
LevelTwo: The source type you entered has already been specified. Specify a unique source type.
RSEG1201
Severity: Question
LevelOne: Changes pending. Save changes?
LevelTwo: You have changes pending. Select Yes to save those changes. Select No to discard those changes
RSEG1202
Severity: Question
LevelOne: Changes pending. Continue?
LevelTwo: You have changes pending. Select Yes to discard those changes. Select No to cancel the operation so you can first save your changes
RSEG1220
Severity: Error
LevelOne: Host name '%1' not found or valid
LevelTwo: A remote system of host name '%1' was not found. If you are working disconnected, de-select the checkbox to verify the host name
RSEG1221
Severity: Information
LevelOne: Verifying host name...
LevelTwo:
RSEG1240
Severity: Error
LevelOne: There is an error on another page
LevelTwo: Another page of the wizard has an error that must be corrected before the wizard can be finished
RSEG1242
Severity: Unexpected
LevelOne: Daemon failed to launch server on %1 using port %2
LevelTwo: %3
RSEG1243
Severity: Unexpected
LevelOne: Failed to connect to the daemon on %1 using port %2 with an unexpected exception
LevelTwo: %3
RSEG1244
Severity: Error
LevelOne: The selected encoding is not supported.
LevelTwo:
RSEG1250
Severity: Error
LevelOne: The pattern may not be blank
LevelTwo:
RSEG1251
Severity: Error
LevelOne: Invalid regular expression
LevelTwo: The value %1 you entered is not a valid regular expression
RSEG1255
Severity: Information
LevelOne: %1 - Running
LevelTwo:
RSEG1256
Severity: Information
LevelOne: %1 - Finished
LevelTwo:
RSEG1257
Severity: Information
LevelOne: %1 - Cancelled
LevelTwo:
RSEG1258
Severity: Information
LevelOne: %1 - Disconnected
LevelTwo:
RSEG1260
Severity: Error
LevelOne: The invocation may not be blank
LevelTwo:
RSEG1270
Severity: Error
LevelOne: Invalid transfer operation
LevelTwo: The source %1 cannot be transferred into the target %2
RSEG1280
Severity: Information
LevelOne: Downloading %1
LevelTwo:
RSEG1281
Severity: Information
LevelOne: Uploading %1
LevelTwo:
RSEG1282
Severity: Information
LevelOne: Synchronizing Resources...
LevelTwo:
RSEG1285
Severity: Information
LevelOne: Extracting %1
LevelTwo:
RSEG1290
Severity: Information
LevelOne: %1 of %2 complete (%3)
LevelTwo:
RSEG1295
Severity: Information
LevelOne: Downloading resources...
LevelTwo:
RSEG1296
Severity: Information
LevelOne: Uploading resources...
LevelTwo:
RSEG1297
Severity: Error
LevelOne: The new password is invalid.
LevelTwo: The remote system indicated that the new password is unacceptable. Please ensure the new password follows all password rules for the remote system.
RSEG1300
Severity: Error
LevelOne: The FTP service is unavailable on the remote system.
LevelTwo: The RSE server needs to be installed manually.
RSEG1301
Severity: Error
LevelOne: The Telnet service is unavailable on the remote system.
LevelTwo: The RSE server needs to be started manually or a system administrator needs to install the RSE daemon.
RSEG1302
Severity: Error
LevelOne: Unable to start the RSE server.
LevelTwo:
RSEG1303
Severity: Error
LevelOne: Unable to install the RSE server.
LevelTwo:
RSEG1304
Severity: Error
LevelOne: Archive Management is not supported by the current File subsystem's configuration.
LevelTwo: In the properties for the File subsystem, choose a configuration that supports Archive Management.
RSEG1400
Severity: Question
LevelOne: This action will take a few minutes. Proceed?
LevelTwo: This action uncompresses a large number of HTML files from a zip file. It will take awhile, and require sufficient disk space. Press Yes to continue, No to cancel.
RSEG1401
Severity: Error
LevelOne: Classic help already enabled.
LevelTwo: The HTML files for the CODE and VisualAge RPG help have already been uncompressed.
RSEG1500
Severity: Error
LevelOne: Remote Error List: %1
LevelTwo:
RSEG1600
Severity: Error
LevelOne: Folder path must not be empty.
LevelTwo: Select a folder from the dropdown list or click the Browse... button and select a folder from the dialog.
RSEG1601
Severity: Error
LevelOne: Regular expression is not valid.
LevelTwo: The value %1 you entered is not a valid regular expression.
Other Messages
RSEO1000
Severity: Information
LevelOne: %1
LevelTwo: %2
RSEO1001
Severity: Warning
LevelOne: %1
LevelTwo: %2
RSEO1002
Severity: Error
LevelOne: %1
LevelTwo: %2
RSEO1003
Severity: Unexpected
LevelOne: %1
LevelTwo: %2
RSEO1004
Severity: Question
LevelOne: %1
LevelTwo: %2
RSEO1005
Severity: Information
LevelOne: %1: %2
LevelTwo: %3
RSEO1006
Severity: Warning
LevelOne: %1: %2
LevelTwo: %3
RSEO1007
Severity: Error
LevelOne: %1: %2
LevelTwo: %3
RSEO1008
Severity: Unexpected
LevelOne: %1: %2
LevelTwo: %3
RSEO1009
Severity: Question
LevelOne: %1: %2
LevelTwo: %3
RSEO1010
Severity: Information
LevelOne: %1
LevelTwo:
RSEO1011
Severity: Warning
LevelOne: %1
LevelTwo:
RSEO1012
Severity: Error
LevelOne: %1
LevelTwo:
RSEO1013
Severity: Unexpected
LevelOne: %1
LevelTwo:
RSEO1014
Severity: Question
LevelOne: %1
LevelTwo:
Files Messages
RSEF1001
Severity: Error
LevelOne: Operation failed. Security violation
LevelTwo: Message reported from file system: %1
RSEF1002
Severity: Error
LevelOne: Operation failed. File system input or output error
LevelTwo: Message reported from file system: %1
RSEF1003
Severity: Error
LevelOne: Folder is not empty. Cannot delete
LevelTwo: The operation failed. One possible reason is that the folder is not empty
RSEF1004
Severity: Error
LevelOne: Folder '%1' not found
LevelTwo:
RSEF1005
Severity: Question
LevelOne: Folder '%1' not found. Would you like to create it?
LevelTwo: The folder you specified does not exist. Select Yes to create it, No to cancel the operation
RSEF1006
Severity: Error
LevelOne: File '%1' not found
LevelTwo:
RSEF1011
Severity: Error
LevelOne: Enter file name pattern
LevelTwo:
RSEF1007
Severity: Error
LevelOne: Filter string '%1' already exists in this filter
LevelTwo:
RSEF1008
Severity: Error
LevelOne: Filter string name pattern not valid
LevelTwo:
RSEF1009
Severity: Information
LevelOne: You must include files or folders or both
LevelTwo:
RSEF1010
Severity: Error
LevelOne: No file types specified
LevelTwo: Either specify one or more file types, or select to subset by file name
RSEF1200
Severity: Information
LevelOne: Create a new File
LevelTwo:
RSEF1201
Severity: Information
LevelOne: Create a new Folder
LevelTwo:
RSEF1202
Severity: Information
LevelOne: Enter folder name
LevelTwo:
RSEF1203
Severity: Error
LevelOne: Names cannot begin or end with whitespace.
LevelTwo:
RSEF1204
Severity: Error
LevelOne: %1 is an invalid character in a name.
LevelTwo:
RSEF1205
Severity: Information
LevelOne: Enter file name
LevelTwo:
RSEF1300
Severity: Error
LevelOne: Deletion of the object %1 failed
LevelTwo: Either the object does not exist or you do not have enough authority to delete the object. If this is a folder, the folder may not be empty
RSEF1301
Severity: Error
LevelOne: Renaming of the object %1 failed
LevelTwo: Rename operation failed because, the object to rename does not exist, or the object with new object name already exists, or the user does not have enough authority to rename the object
RSEF1302
Severity: Error
LevelOne: No authority or file name not valid
LevelTwo: The file could not be created because of one of the following reasons:
- the user does not have enough authority to create the file
- the file name is not valid
RSEF1303
Severity: Error
LevelOne: File already exists
LevelTwo: The new file %1 already exists
RSEF1304
Severity: Error
LevelOne: Creation of the folder failed
LevelTwo: The folder %1 could not be created because of one of the following reasons:
- the user does not have enough authority to create the folder
- the folder name is not valid
RSEF1305
Severity: Error
LevelOne: The operation did not complete successfully. See additional messages in the Remote Shell view
LevelTwo: The operation requested failed. Look in the Remote Shell view to see additional messages indicating the cause of the failure
RSEF1306
Severity: Error
LevelOne: Copy of the file or folder %1 failed
LevelTwo: The file system reported the copy operation failed. You may not have authority to the target folder, or it may be in use
RSEF1307
Severity: Error
LevelOne: Move of the file or folder %1 failed
LevelTwo: The file system reported the move operation failed. You may not have authority to the source folder or file, or you may not have authority to the target folder, or it may be in use
RSEF1308
Severity: Error
LevelOne: Target folder cannot equal source folder
LevelTwo: Attempting to move a file or folder to the same folder as it exists in is equivalent to a rename operation. Use the rename action for this
RSEF1309
Severity: Error
LevelOne: Folder already exists
LevelTwo: The new folder %1 already exists
RSEF1310
Severity: Question
LevelOne: New resource will not be visible due to subsetting. Create it anyway?
LevelTwo: The name of the resource you are creating does not match the current filter criteria. If you select Yes to create the resource, it will not be visible within the current filter.
RSEF1311
Severity: Question
LevelOne: Resource will not be visible due to subsetting. Rename it anyway?
LevelTwo: The new name of the resource does not match the current filter criteria. If you select Yes to rename the resource, it will not be visible within the current filter.
RSEF1312
Severity: Error
LevelOne: Target folder cannot descend from source folder
LevelTwo: It is impossible to move a folder to one of its subfolders.
RSEF1315
Severity: Information
LevelOne: Deleting %1...
LevelTwo:
RSEF5001
Severity: Error
LevelOne: File %1 on %2 can not be opened. You do not have read access to the file.
LevelTwo: Change file permissions to ensure you have read access to the file.
RSEF5002
Severity: Question
LevelOne: You do not have write access to file %1 on %2. Do you want to open the file in browse mode?
LevelTwo: You do not have write permission to the file %1 on %2. You can open the file in browse (read-only) mode. If you want to edit the file, change file permissions to allow write access to the file.
RSEF5003
Severity: Error
LevelOne: File %1 can not be saved on %2. You do not have write access to the file.
LevelTwo: Change file permissions to ensure you have write access to the file.
RSEF5004
Severity: Error
LevelOne: File %1 can not be saved on %2. You do not have write access to the file.
LevelTwo: Change file permissions to ensure you have write access to the file.
RSEF5005
Severity: Question
LevelOne: File %1 on %2 was modified since you opened this file or saved the file on the server. Do you want to replace the current contents of the file on the server?
LevelTwo: The file %1 was changed on the server after it was retrieved from %2 or since the last time the file was saved on the server. Choose Yes to replace the contents of the file. Choose No to leave the file on the server with its current contents.
RSEF5006
Severity: Error
LevelOne: File %1 was not completely saved on %2. The file was saved in the local file system.
LevelTwo: An error occurred while saving the file on the server. A possible cause is the connection to the server was terminated. The file may only have been saved partially on the server. However, it was saved locally to help you recover. You will be asked to save the local copy to the server the next time you connect.
RSEF5007
Severity: Question
LevelOne: File %1 on %2 may not have been saved completely during an earlier edit session. The file was saved on the local file system. Do you want to replace the file with the local copy now?
LevelTwo: An error occurred during an earlier attempt to save the file. But a local copy of the file was saved for recovery. Choose Yes to save the local copy on the server. Choose No if recovery is not required.
RSEF5008
Severity: Question
LevelOne: File %1 does not exist on %2. Do you want to create the file?
LevelTwo: Choose Yes to create the file on the server and save the contents to the file. Choose No if you do not want the file to be created.
RSEF5009
Severity: Question
LevelOne: You are currently editing file %1 on %2. Do you want to open the file in browse mode?
LevelTwo: You are allowed to edit a file in one editor only. You can, however, open the file in another editor for browsing. Browsing lets you view the file but does not allow you to edit its contents.
RSEF5010
Severity: Error
LevelOne: Profile named %1 does not exist.
LevelTwo: Profile may have been renamed or deleted.
RSEF5011
Severity: Error
LevelOne: Connection named %1 does not exist.
LevelTwo: Connection may have been renamed or deleted.
RSEF5012
Severity: Question
LevelOne: File %1 already exists. Do you want to replace it?
LevelTwo:
RSEF5013
Severity: Question
LevelOne: Parent folder %1 does not exist. Do you want to create it?
LevelTwo: The parent folder must be created for the file to be created.
RSEF5014
Severity: Error
LevelOne: Parent folder %1 does not exist. Verify that the correct path was entered.
LevelTwo:
RSEF5020
Severity: Information
LevelOne: Folder %1 is not readable. Cannot expand
LevelTwo:
RSEF5101
Severity: Error
LevelOne: Unable to use connection.
LevelTwo: Please correct, or select alternate connection.
RSEF5102
Severity: Error
LevelOne: Unexpected exception received: %1.
LevelTwo: Please see error log for details.
RSEF5103
Severity: Question
LevelOne: The file '%1' already exists on %2. Do you want to overwrite it?
LevelTwo: Click Yes to overwrite the existing file, or click No to cancel the export.
RSEF6001
Severity: Error
LevelOne: File type extension can not be empty.
LevelTwo:
RSEF6002
Severity: Error
LevelOne: File type extension must not contain '*' or '.'
LevelTwo:
RSEF6003
Severity: Error
LevelOne: The encoding is not supported.
LevelTwo:
RSEF6101
Severity: Warning
LevelOne: One or more cached files have changes that have not been saved on the host.
LevelTwo:
RSEF6102
Severity: Warning
LevelOne: Unable to synchronize cache changes to host. Operation cancelled.
LevelTwo:
RSEF6201
Severity: Error
LevelOne: The IP address or host name can not be empty.
LevelTwo:
RSEF6202
Severity: Error
LevelOne: The IP address is not valid.
LevelTwo:
RSEF6203
Severity: Error
LevelOne: The host name is not valid.
LevelTwo:
RSEF7001
Severity: Error
LevelOne: Enter CCSID
LevelTwo:
RSEF7002
Severity: Error
LevelOne: CCSID must be a number between 0 and 65535
LevelTwo:
RSEF8001
Severity: Unexpected
LevelOne: An unknown error occurred.
LevelTwo: %1
RSEF8002
Severity: Unexpected
LevelOne: An unexpected error occurred.
LevelTwo: %1
RSEF8003
Severity: Error
LevelOne: Value is not valid
LevelTwo: %1
RSEF8004
Severity: Error
LevelOne: Input %1 is not valid
LevelTwo: %1
RSEF8050
Severity: Error
LevelOne: Can not copy root file system
LevelTwo: The root is not something that can be copied
RSEF8051
Severity: Error
LevelOne: Could not close import stream for %1
LevelTwo:
RSEF8052
Severity: Error
LevelOne: Unable to import %1: %2
LevelTwo: %3
RSEF8053
Severity: Information
LevelOne: Creating folder %1
LevelTwo:
RSEF8054
Severity: Error
LevelOne: Problems were encountered during import
LevelTwo: %1
RSEF8055
Severity: Error
LevelOne: Error opening input stream for %1
LevelTwo: %2
RSEF8056
Severity: Error
LevelOne: Unable to import %1
LevelTwo: The file cannot be copied onto itself
RSEF8057
Severity: Error
LevelOne: Error occurred while exporting %1: %2
LevelTwo: %3
RSEF8058
Severity: Error
LevelOne: Problems were encountered during export
LevelTwo: %1
RSEF8059
Severity: Error
LevelOne: Cannot overwrite file %1
LevelTwo: The file does not have its write attribute set, so it cannot be written to
RSEF8060
Severity: Question
LevelOne: Target folder does not exist. Would you like to create it?
LevelTwo: Press Yes to create the folder %1, No to cancel
RSEF8061
Severity: Error
LevelOne: Target folder already exists, as a file
LevelTwo: The remote resource %1 already exists, but as a file, not a folder
RSEF8062
Severity: Error
LevelOne: Destination folder conflicts with location of %1
LevelTwo: You are attempting to export to the local file system, to a location that overlaps the resources being exported.
RSEF8063
Severity: Error
LevelOne: Source is a file, not a folder
LevelTwo: The remote resource %1 is a file, but a folder is required
RSEF8064
Severity: Error
LevelOne: There are no resources currently selected for import
LevelTwo:
RSEF8065
Severity: Error
LevelOne: Select the source directory
LevelTwo:
RSEF8066
Severity: Information
LevelOne: Enter or select a source folder
LevelTwo: You have left the source folder empty, but it must be set to continue.
RSEF8067
Severity: Error
LevelOne: Export problems
LevelTwo: %1
RSEF8068
Severity: Error
LevelOne: There are no resources currently selected for export
LevelTwo: Select resources to be exported and try again
RSEF8069
Severity: Information
LevelOne: Please enter a destination folder
LevelTwo: The destination folder is empty. You must select a destination folder.
RSEF8070
Severity: Error
LevelOne: Import problems
LevelTwo: %1
RSEF8071
Severity: Error
LevelOne: There are no resources currently selected for import
LevelTwo: Select resources to be imported and try again
RSEF8072
Severity: Information
LevelOne: Filtering selection...
LevelTwo:
Communications Messages
RSEC1001
Severity: Error
LevelOne: Connection to %1 could not be established.
LevelTwo: A socket connection to %1 could not be established. If you are connecting via the communications daemon make sure the daemon is running on the remote system. If you are connecting directly to the communications server make sure the server is started on the remote system. If you are connecting using REXEC, make sure that the server is installed on the remote system and that the REXEC service is running on that system.
RSEC1002
Severity: Error
LevelOne: Invalid password or user ID
LevelTwo: Authentication with %1 failed because the password or user ID is not correct.
RSEC1003
Severity: Error
LevelOne: The user ID %1 is not valid
LevelTwo: The user ID %1 on host %2 is not valid. Change the user ID and try again.
RSEC1004
Severity: Error
LevelOne: The saved password is not correct.
LevelTwo: The saved password for user ID %1 on host %2 is not correct. Please enter the password and try again.
RSEC2001
Severity: Error
LevelOne: Environment variable %1 is already defined
LevelTwo: An environment variable %1 has already been defined. Change the new environment variable's name and press the Add button.
RSEC2002
Severity: Warning
LevelOne: Environment variable must have a name.
LevelTwo: An attempt was made to define an environment variable with a blank name. Type a value for the environment variable name.
RSEC2003
Severity: Warning
LevelOne: Environment variable must have a name.
LevelTwo: An attempt was made to clear the name of an environment variable. To remove an environment variable, select the variable in the list add press the Remove button.
RSEC2004
Severity: Error
LevelOne: Environment variable name contains an invalid character.
LevelTwo: The environment variable name cannot contain a space or the '=' character.
RSEC2101
Severity: Error
LevelOne: Saved password for %1 on %2 already exists.
LevelTwo: The password for user ID %1 on host %2 is already saved. Enter a different user ID or host name or change the existing saved password.
RSEC2102
Severity: Error
LevelOne: New and verify passwords do not match.
LevelTwo: The new and verify passwords must match (case sensitive) in order to save the new password. Retype the new and verify passwords and try again.
RSEC2103
Severity: Error
LevelOne: Entry field cannot be blank.
LevelTwo: The hostname, user ID, system type and password entry fields cannot be blank. Type a value and press the Enter key to save the changes.
RSEC2104
Severity: Error
LevelOne: There are no tools installed which support saving password information.
LevelTwo: The password information preference page is a centralized place for Workbench tools to save password information. Each tool registers and provides its own encryption algorithm. There are no tools installed that have registered with the password information preference page.
RSEC2301
Severity: Error
LevelOne: Unable to launch server on host %1.
LevelTwo: Message from host: %2
RSEC2302
Severity: Error
LevelOne: Invalid password or user ID for %1.
LevelTwo: Message from host: %2
RSEC2303
Severity: Error
LevelOne: Incompatible host server running on remote system %1.
LevelTwo: The host server is not a Remote System Explorer server.
RSEC2304
Severity: Error
LevelOne: Incompatible Remote System Explorer host server running on remote system %1.
LevelTwo: The host server needs to be updated to work with the current client.
RSEC2305
Severity: Error
LevelOne: Unable to connect to REXEC host service on port %1 of host %2
LevelTwo: Message from host: %3
RSEC2306
Severity: Warning
LevelOne: Port %1 is normally used for the %2 service.
LevelTwo:
RSEC2307
Severity: Error
LevelOne: Unable to establish a secure connection with the Remote System Explorer host server.
LevelTwo: Make sure both the client and server are configured to use SSL. The SSL handshake between client and server failed with the following exception: %1
RSEC2308
Severity: Warning
LevelOne: The host server running on remote system %1 is an older version than the RSE client.
LevelTwo: It is recommended that the client and server versions match.
RSEC2309
Severity: Warning
LevelOne: The host server running on remote system %1 is a newer version than the RSE client.
LevelTwo: It is recommended that the client and server versions match.
RSEC2310
Severity: Information
LevelOne: Starting Remote System Explorer host server using REXEC
LevelTwo:
RSEC2311
Severity: Information
LevelOne: Starting Remote System Explorer host server using daemon
LevelTwo:
RSEC2312
Severity: Information
LevelOne: Connecting to Remote System Explorer host server on port %1
LevelTwo:
RSEC2313
Severity: Information
LevelOne: Initializing Remote System Explorer host server
LevelTwo:
RSEC2314
Severity: Information
LevelOne: Communication with the remote system %1 has been secured using SSL. Continue?
LevelTwo:
RSEC2315
Severity: Information
LevelOne: Connection %1 has not been secured using SSL. Proceed anyway?
LevelTwo:
RSEC2316
Severity: Error
LevelOne: The specified server port is out of the allowed range: %1
LevelTwo:
RSEC3001
Severity: Error
LevelOne: The connection %1 is currently offline and cannot be connected.
LevelTwo: You have performed an action which requires a live connection to the remote system. Switch the connection to online and perform the action again. To switch the connection online, right click on the connection %1 and deselect the Work Offline action.
