| |
On Mint (101.32) this hardware seems to have some bad firmware. Others
report a similar problem and yet others say they have no problem at
all. If I knew how to obtain an update to the firmware and how to
install it, no doubt it would all work! The problem is only for
writing TAO. DAO seems just fine.
# cdrecord -v speed=8 dev=0,1,0 -pad -audio -dummy *.wav
...
Track 01: 0 of 29 MB written.cdrecord:
Input/output error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
...
cdrecord:
Input/output error. mode select g1: scsi sendcmd: retryable error
CDB: 55 10 00 00 00 00 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
|
Bill Unruh ([email protected]), posting on comp.os.linux.misc in
January 2001, had the same problem with a 8080B compatible and
mentioned that it works okay in DAO mode but not TAO. This is expected
to be a transient problem as the driver catches up with the drive.
Copyright © 1995-2006 [email protected]
|
|
