Follow Techotopia on Twitter

On-line Guides
All Guides
eBook Store
iOS / Android
Linux for Beginners
Office Productivity
Linux Installation
Linux Security
Linux Utilities
Linux Virtualization
Linux Kernel
System/Network Admin
Programming
Scripting Languages
Development Tools
Web Development
GUI Toolkits/Desktop
Databases
Mail Systems
openSolaris
Eclipse Documentation
Techotopia.com
Virtuatopia.com

How To Guides
Virtualization
General System Admin
Linux Security
Linux Filesystems
Web Servers
Graphics & Desktop
PC Hardware
Windows
Problem Solutions

  




 

 

F.2.2. The Boot Loader

This section looks at the default boot loader for the x86 platform, GRUB. For more information about configuring and using GRUB, see Appendix E, The GRUB Boot Loader .
A boot loader for the x86 platform is broken into at least two stages. The first stage is a small machine code binary on the MBR. Its sole job is to locate the second stage boot loader and load the first part of it into memory.
GRUB has the advantage of being able to read ext2 and ext3 [7] partitions and load its configuration file — /boot/grub/grub.conf — at boot time. Refer to Section E.6, “GRUB Menu Configuration File” for information on how to edit this file.

ext4 and Btrfs

The GRUB bootloader does not support the ext4 or Btrfs file systems.

Note

If upgrading the kernel using the Red Hat Update Agent , the boot loader configuration file is updated automatically. More information on Red Hat Network can be found online at the following URL: https://rhn.redhat.com/.
Once the second stage boot loader is in memory, it presents the user with a graphical screen showing the different operating systems or kernels it has been configured to boot. On this screen a user can use the arrow keys to choose which operating system or kernel they wish to boot and press Enter . If no key is pressed, the boot loader loads the default selection after a configurable period of time has passed.
Once the second stage boot loader has determined which kernel to boot, it locates the corresponding kernel binary in the /boot/ directory. The kernel binary is named using the following format — /boot/vmlinuz- <kernel-version> file (where <kernel-version> corresponds to the kernel version specified in the boot loader's settings).
For instructions on using the boot loader to supply command line arguments to the kernel, refer to Appendix E, The GRUB Boot Loader . For information on changing the runlevel at the boot loader prompt, refer Section E.7, “Changing Runlevels at Boot Time”.
The boot loader then places one or more appropriate initramfs images into memory. Next, the kernel decompresses these images from memory to /sysroot/, a RAM-based virtual file system, via cpio. The initramfs is used by the kernel to load drivers and modules necessary to boot the system. This is particularly important if SCSI hard drives are present or if the systems use the ext3 or ext4 file system.
Once the kernel and the initramfs image(s) are loaded into memory, the boot loader hands control of the boot process to the kernel.
For a more detailed overview of the GRUB boot loader, refer to Appendix E, The GRUB Boot Loader .


[7] GRUB reads ext3 file systems as ext2, disregarding the journal file. Refer to the chapter titled The ext3 File System in the Red Hat Enterprise Linux Deployment Guide for more information on the ext3 file system.


 
 
  Published under the terms of the Open Publication License Design by Interspire