13.8. Making the Kickstart File Available
Normally a kickstart file is copied to the boot diskette, or made available on the network. The network-based approach is most commonly used, as most kickstart installations tend to be performed on networked computers.
Let us take a more in-depth look at where the kickstart file may be placed.
Diskette-based booting is no longer supported in Fedora. Installations must use CD-ROM or flash memory products for booting. However, the kickstart file may still reside on a diskette's top-level directory, and must be named
To perform a CD-ROM-based kickstart installation, the kickstart file must be named
and must be located in the boot CD-ROM's top-level directory. Since a CD-ROM is read-only, the file must be added to the directory used to create the image that is written to the CD-ROM. Refer to Section 3.4.2, “Making an Installation Boot CD-ROM”
for instructions on creating boot media; however, before making the
image file, copy the
kickstart file to the
To perform a pen-based flash memory kickstart installation, the kickstart file must be named
ks.cfg and must be located in the flash memory's top-level directory. Create the boot image first, and then copy the
For example, the following transfers a boot image to the pen drive (
/dev/sda) using the
dd if=diskboot.img of=/dev/sda bs=1M
Creation of USB flash memory pen drives for booting is possible, but is heavily dependent on system hardware BIOS settings. Refer to your hardware manufacturer to see if your system supports booting to alternate devices.