The installation program is network-aware and can use network settings for a number of functions. For instance, you can install Fedora from a network server using FTP, HTTP, or NFS protocols. You can also instruct the installation program to consult additional software repositories later in the process.

If you are performing a network installation, the Configure TCP/IP dialog appears. This dialog asks for your IP and other network addresses. You can choose to configure the IP address and Netmask of the device via DHCP or manually.

By default, the installation program uses DHCP to automatically provide network settings. If you use a cable or DSL modem, router, firewall, or other network hardware to communicate with the Internet, DHCP is a suitable option. If your network has no DHCP server, clear the check box labeled Use dynamic IP configuration (DHCP) .

Enter the IP address you are using during installation and press Enter .

The installation program supports only the IPv4 protocol. Refer also to Section 7.15, “Network Configuration” for more information on configuring your network.

When the installation process completes, it will transfer these settings to your system.

You can install from a Web, FTP, or NFS server either on your local network or, if you are connected, on the Internet. You may install Fedora from your own private mirror, or use one of the public mirrors maintained by members of the community. To ensure that the connection is as fast and reliable as possible, use a server that is close to your own geographical location.

The Fedora Project maintains a list of Web and FTP public mirrors, sorted by region, at https://fedoraproject.org/wiki/Mirrors. To determine the complete directory path for the installation files, add /11/Fedora/ architecture /os/ to the path shown on the web page. A correct mirror location for an i386 system resembles the URL https://mirror.example.com/pub/fedora/linux/releases/11/Fedora/i386/os.